HR300 Platform Lift
HR300 Platform Lift
The HR300 lift is a fully enclosed platform lift, there is little or no builders work involved in installing this lift. A ramp can be added to the lift to remove the need for a pit. Each lift comes with automatic or manual doors. See below the drawing and specification which outlines the ordination of the lift.
Drive system | Screw drive |
Nominal load | 400 kg / 5 persons |
Lifting speed | 0.15 m/sec (9 m/min) |
Lifting height | Up to 13 meters |
Number of stops (floors) | Up to 6 |
Platform dimensions (length x width, mm) *other dimensions available |
1100 x 1400 1070 x 1485 1150 x 1485 |
Shaft dimensions (length x widths, mm) | 1500 x 1460 1460 x 1540 1540 x 1540 |
Dimensions of the doors (width x height, mm) *other dimensions available |
900 x 2000 (when platform is 1100 x 1400) 940 x 2000 |
Dimensions of the gate (width x height, mm) | 900 x 1300 (when platform is 1100 x 1400) 940 x 1300 |
Configuration of the doors | Opens from left or right side, up to 3 doors per floor |
Shaft walls | Steel or tempered glass panels |
Standard colors *the lift can be painted in any RAL color |
RAL 9010 (pure white) (for special price) RAL 9006 (light grey aluminum) |
Soft START/STOP | Standard equipment |
Power supply | 220-230 V, 1 Ph, 25A 380-400 V 3 Ph, 16A, 50 or 60 Hz |
Engine | 2.2 kW |
Noise level | Less than 70 dB |
Control system | Micro controler |
Safety equipment | Protective edge around the platform, emergency braking buttons inside the platform and in the shaft, emergency stop switches, electronic speed control, overload detectors, door opening and lock control, screw damping sensors, electronic engine management |
Conformity of the European Standard | EN81-41: 2010 |
In the below pictures you can see the inside of the carriage. Shaft walls act as the interior of the lift car, giving it the extra safety with a full height safety edge. The HR300 can be installed in your home or in a commercial property to help your building become wheelchair friendly and comply with DAC.
Added safety features
Self-braking torque of a nut and a screw
• Electromechanical brake inside the motor
• Electromechanical brake on the nut, executed by powerful solenoids
• In case of emergency situations the lift mechanism is supplied with a manual emergency descent. Optionally, the emergency lowering mechanism may be actuated by an electric motor with a backup battery.