HR300 Platform Lift

HR300 Platform Lift

The HR300 lift is a fully enclosed platform lift, there is little or no builders work involved in installing this lift. A ramp can be added to the lift to remove the need for a pit. Each lift comes with automatic or manual doors. See below the drawing and specification which outlines the ordination of the lift.

Drive system Screw drive
Nominal load 400 kg / 5 persons
Lifting speed 0.15 m/sec (9 m/min)
Lifting height Up to 13 meters
Number of stops (floors) Up to 6
Platform dimensions (length x width, mm)
*other dimensions available
1100 x 1400
1070 x 1485
1150 x 1485
Shaft dimensions (length x widths, mm) 1500 x 1460
1460 x 1540
1540 x 1540
Dimensions of the doors (width x height, mm)
*other dimensions available
900 x 2000 (when platform is 1100 x 1400)
940 x 2000
Dimensions of the gate (width x height, mm) 900 x 1300 (when platform is 1100 x 1400)
940 x 1300
Configuration of the doors Opens from left or right side, up to 3 doors per floor
Shaft walls Steel or tempered glass panels
Standard colors
*the lift can be painted in any RAL color
RAL 9010 (pure white) (for special price)
RAL 9006 (light grey aluminum)
Soft START/STOP Standard equipment
Power supply 220-230 V, 1 Ph, 25A
380-400 V 3 Ph, 16A, 50 or 60 Hz
Engine 2.2 kW
Noise level Less than 70 dB
Control system Micro controler
Safety equipment Protective edge around the platform, emergency braking buttons inside the platform and in the shaft, emergency stop switches, electronic speed control, overload detectors, door opening and lock control, screw damping sensors, electronic engine management
Conformity of the European Standard EN81-41: 2010

In the below pictures you can see the inside of the carriage.  Shaft walls act as the interior of the lift car, giving it the extra safety with a full height safety edge. The HR300 can be installed in your home or in a commercial property to help your building become wheelchair friendly and comply with DAC.

Added safety features 

Self-braking torque of a nut and a screw
• Electromechanical brake inside the motor
• Electromechanical brake on the nut, executed by powerful solenoids
• In case of emergency situations the lift mechanism is supplied with a manual emergency descent. Optionally,    the    emergency lowering mechanism may be actuated by an electric motor with a backup battery.

Call us, email us or leave a message and we'll call you back!

+353 (0)1 853 7352

    Other Products

    Goods Lifts

    Home Lifts

    Platform Lifts

    Bespoke Lifts

    Skip to content